This Schedule 160 seamless nylon pipe is engineered for high-pressure, corrosive environments. Its robust construction ensures reliable fluid conveyance in critical industrial applications.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Pipe Size | 5.5" |
| Outside Diameter | 6.192" |
| Wall Thickness | 0.498" |
A proven choice for industrial professionals, this 5.5" nominal size seamless nylon pipe boasts an actual outside diameter of 6.192" and a substantial 0.498" wall thickness, meeting Schedule 160 requirements. Nylon's inherent properties provide excellent resistance to a wide range of chemicals, abrasion, and impact, making it ideal for hydraulic systems, chemical processing, and pneumatic lines where reliability under stress is paramount. The seamless construction eliminates potential leak paths and ensures consistent wall integrity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure pipe ends are clean and free of debris before joining. 2. Utilize appropriate fittings and joining methods (e.g., solvent welding, flanging) as specified for nylon. 3. Verify pressure and temperature ratings are within system operational parameters.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible fittings not rated for nylon or the specific pressure/temperature. | Always select fittings specifically designed and rated for nylon pipe and the intended service conditions. |
| Exceeding the recommended bend radius, leading to kinking or stress concentration. | Adhere to the manufacturer's specified minimum bend radius for nylon pipe to maintain structural integrity. |
A: This Seamless Pipe, Schedule 160 is manufactured from Nylon.
A: High-pressure hydraulic lines, Chemical transfer and processing, Pneumatic conveying systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||