This Schedule 160 seamless nylon pipe offers exceptional pressure handling and chemical resistance. Its robust construction ensures reliable performance in critical industrial applications requiring precise fluid conveyance.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Pipe Size | 0.5" |
| Outside Diameter | 6.208" |
| Wall Thickness | 0.264" |
Built to exacting engineering tolerances, this 0.5-inch nominal size seamless nylon pipe features a precise 6.208-inch outside diameter and a substantial 0.264-inch wall thickness, conforming to Schedule 160 specifications. Nylon's inherent properties, including high tensile strength, excellent abrasion resistance, and good chemical inertness against various fluids, make it suitable for high-pressure pneumatic lines, hydraulic systems, and chemical transfer where durability and reliability are paramount. Its smooth internal surface minimizes flow restriction and turbulence.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean and free of debris. 2. Apply appropriate sealant or tape to threaded connections, if applicable. 3. Securely tighten fittings to achieve a leak-free seal, avoiding over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening fittings, leading to stress fractures in the nylon pipe. | Use proper torque specifications for fittings and employ a calibrated torque wrench if available. |
| Using incompatible sealants or solvents that can degrade nylon. | Consult the material compatibility chart for nylon and select only approved sealants and cleaning agents. |
A: This Seamless Pipe, Schedule 160 is manufactured from Nylon.
A: High-pressure pneumatic systems, Industrial fluid transfer, Chemical conveyance lines.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||