Engineered for exceptional durability, this Nylon Schedule 80 seamless pipe offers superior chemical resistance and abrasion protection for critical fluid conveyance in harsh industrial applications.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Pipe Size | 5.3" |
| Outside Diameter | 5.375" |
| Wall Thickness | 0.312" |
Designed for demanding industrial environments, this 5.3-inch nominal bore Nylon Schedule 80 seamless pipe features an precise 5.375-inch outside diameter and a robust 0.312-inch wall thickness. Constructed from high-grade Nylon, it exhibits excellent tensile strength, impact resistance, and a broad operating temperature range, making it ideal for conveying abrasive fluids, chemicals, and high-pressure systems where reliability is paramount. Its seamless construction ensures uniform wall thickness and leak-free performance under stress.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all mating surfaces are clean, free of debris, and properly chamfered. 2. Apply appropriate solvent cement and primer, following manufacturer's instructions, to both the pipe end and fitting socket. 3. Assemble pipe and fitting with a quick, twisting motion, holding for 30 seconds to allow initial bonding. 4. Allow adequate cure time based on ambient temperature and humidity before pressurizing the system.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect solvent cement and primer for Nylon pipe. | Always use solvent cement and primer specifically formulated for Nylon to ensure proper fusion and chemical bonding. |
| Insufficient cure time before system pressurization. | Adhere strictly to the recommended cure times provided by the solvent cement manufacturer, considering environmental conditions, to prevent joint failure. |
A: This Seamless Pipe, Schedule 80 is manufactured from Nylon.
A: Chemical processing and transfer, Hydraulic and pneumatic lines, Industrial fluid conveyance systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||