This Schedule 80 seamless Nylon pipe offers superior durability and chemical resistance for critical fluid conveyance systems. Its robust construction ensures reliable performance under pressure.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Pipe Size | 4.2" |
| Outside Diameter | 5.692" |
| Wall Thickness | 0.179" |
Built to exacting engineering tolerances, this 4.2" nominal size seamless pipe boasts an outside diameter of 5.692" and a substantial 0.179" wall thickness, conforming to Schedule 80 specifications. Engineered from high-grade Nylon, it exhibits excellent abrasion resistance, low friction, and compatibility with a wide range of chemicals, making it suitable for demanding industrial and hydraulic applications where reliability and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure pipe ends are clean and free of debris. 2. Apply appropriate solvent cement and primer to both pipe and fitting surfaces. 3. Join pipe and fitting with a firm twisting motion, holding for 30 seconds to set. 4. Allow adequate cure time per solvent cement manufacturer's recommendations before pressurization.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect solvent cement for Nylon. | Always verify that the solvent cement is specifically formulated for Nylon pipe and fittings. |
| Inadequate cure time before system operation. | Adhere strictly to the cure time specified by the solvent cement manufacturer to ensure a secure, leak-proof joint. |
A: This Seamless Pipe, Schedule 80 is manufactured from Nylon.
A: Hydraulic systems, Chemical transfer lines, Pneumatic conveying, Automotive fluid lines.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||