This Schedule 80 seamless Nylon pipe is engineered for robust performance in challenging industrial settings. Its high strength and chemical inertness make it an excellent choice for critical fluid and material handling applications.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Pipe Size | 2.9" |
| Outside Diameter | 6.240" |
| Wall Thickness | 0.401" |
Designed for demanding industrial environments, this 2.9" nominal size seamless Nylon pipe boasts a precise 6.240" outside diameter and a substantial 0.401" wall thickness, classifying it as Schedule 80. Manufactured from high-grade Nylon, it offers exceptional resistance to a broad spectrum of chemicals, abrasion, and impact, ensuring longevity in aggressive operational conditions. The smooth internal surface minimizes friction loss, enhancing flow efficiency for various fluids and slurries, while its high tensile strength supports moderate pressure applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all mating surfaces are clean and free of debris. 2. Apply appropriate solvent cement and primer to both the pipe end and fitting socket. 3. Insert the pipe into the fitting with a slight twisting motion to ensure full coverage. 4. Hold firmly for 30 seconds to prevent slippage and allow initial bonding.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect solvent cement for Nylon. | Always use a solvent cement specifically formulated for Nylon or compatible plastics, ensuring proper chemical adhesion. |
| Insufficient curing time before pressurization. | Allow adequate curing time as recommended by the solvent cement manufacturer before introducing pressure to the system to prevent joint failure. |
A: This Seamless Pipe, Schedule 80 is manufactured from Nylon.
A: Chemical processing and transfer lines, Hydraulic and pneumatic systems, Industrial fluid conveyance, Abrasion-resistant material handling.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||