This Schedule 80 seamless nylon pipe offers superior durability and chemical resistance for demanding industrial applications. Its robust construction ensures reliable performance under pressure.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Pipe Size | 1.7" |
| Outside Diameter | 4.540" |
| Wall Thickness | 0.393" |
Built to exacting engineering tolerances, this 1.7" IPS (nominal) Schedule 80 seamless nylon pipe features a precise 4.540" outside diameter and a substantial 0.393" wall thickness. Nylon's inherent properties of high tensile strength, excellent abrasion resistance, and resistance to a wide range of chemicals make it ideal for conveying fluids and gases in environments where corrosion and impact are concerns. Its smooth internal bore minimizes friction loss, contributing to efficient fluid dynamics. This pipe is engineered for applications requiring robust material integrity and consistent dimensional accuracy.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure pipe ends are clean and free of debris. 2. Apply appropriate solvent cement and primer to both the pipe end and fitting socket. 3. Insert pipe into fitting with a slight twist to ensure even cement distribution. 4. Hold firmly for 30 seconds to prevent slippage. 5. Allow adequate cure time according to cement manufacturer specifications before pressurizing.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect solvent cement for nylon. | Always use a solvent cement specifically formulated for nylon or compatible plastics as recommended by the pipe manufacturer. |
| Insufficient cure time before system pressurization. | Adhere strictly to the cure time guidelines provided by the solvent cement manufacturer to ensure a strong, leak-proof joint. |
A: This Seamless Pipe, Schedule 80 is manufactured from Nylon.
A: High-pressure hydraulic systems, Chemical transfer lines, Pneumatic conveying systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||