This Schedule 80 seamless nylon pipe is engineered for extreme environments. Its robust construction and material properties deliver reliable performance in demanding industrial applications requiring high pressure and chemical resilience.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Pipe Size | 1.7" |
| Outside Diameter | 1.121" |
| Wall Thickness | 0.480" |
Purpose-built for heavy-duty applications, this seamless nylon pipe features a 1.7-inch nominal inside diameter and a 1.121-inch outside diameter, resulting in a substantial 0.480-inch wall thickness, classifying it as Schedule 80. Nylon's inherent properties of high tensile strength, excellent abrasion resistance, and superior chemical inertness make this pipe ideal for conveying aggressive fluids and operating under significant pressure. It is designed to withstand rigorous industrial conditions, including exposure to various solvents, oils, and fuels, without degradation.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the pipe ends are clean and free from debris. 2. Apply appropriate solvent cement to both the pipe end and the fitting socket. 3. Insert the pipe into the fitting with a slight twisting motion and hold for 30 seconds. 4. Allow adequate cure time as recommended by the cement manufacturer before pressurizing.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improperly cleaning pipe ends before joining. | Thoroughly clean pipe ends and fittings with a deburring tool and a clean cloth to remove any dirt or oxidation, ensuring a strong bond. |
| Using the wrong type or amount of solvent cement. | Consult the pipe and fitting manufacturer's recommendations for the correct solvent cement and apply it evenly to both surfaces for optimal adhesion. |
A: This Seamless Pipe, Schedule 80 is manufactured from Nylon.
A: Hydraulic systems, Pneumatic lines, Chemical transfer, High-pressure fluid conveyance.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||