This 1.4" ID, Schedule 80 seamless nylon pipe delivers exceptional strength and chemical inertness. Its robust construction ensures reliable fluid and gas conveyance in challenging environments.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Pipe Size | 1.4" |
| Outside Diameter | 6.227" |
| Wall Thickness | 0.305" |
Engineered for reliability and performance, this Schedule 80 seamless nylon pipe features a 1.4" nominal inside diameter, a precise 6.227" outside diameter, and a substantial 0.305" wall thickness. Manufactured from high-grade nylon, it exhibits excellent tensile strength, abrasion resistance, and a broad chemical compatibility profile, making it suitable for high-pressure systems, hydraulic lines, and chemical transfer where corrosive media is present. The seamless construction eliminates potential leak paths and ensures uniform wall thickness for consistent performance under stress.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the pipe ends are clean and free of debris. 2. Apply appropriate solvent cement and primer to both pipe and fitting surfaces. 3. Insert pipe into fitting with a slight twisting motion until it bottoms out, holding for 30 seconds to set. 4. Allow adequate cure time as per cement manufacturer's specifications before pressurizing.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible solvent cement for nylon. | Always use solvent cement specifically formulated for nylon to ensure proper fusion and prevent material degradation. |
| Insufficient cure time before system pressurization. | Adhere strictly to the solvent cement manufacturer's recommended cure times to guarantee joint integrity and prevent leaks. |
A: This Seamless Pipe, Schedule 80 is manufactured from Nylon.
A: High-pressure fluid conveyance, Chemical transfer lines, Hydraulic systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||