This Schedule 80 seamless Nylon pipe is engineered for robust performance in demanding industrial environments. Its high strength and chemical resistance make it ideal for pressure applications where reliability is paramount.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Pipe Size | 0.6" |
| Outside Diameter | 1.915" |
| Wall Thickness | 0.186" |
Purpose-built for heavy-duty applications, this Nylon pipe conforms to Schedule 80 dimensional standards, featuring a nominal pipe size of 0.6 inches, an outside diameter of 1.915 inches, and a substantial wall thickness of 0.186 inches. The inherent properties of Nylon provide excellent resistance to abrasion, impact, and a wide range of chemicals, solvents, and oils. This makes it a superior choice for conveying fluids, gases, and for pneumatic systems in manufacturing, automotive, and hydraulic applications where durability and sustained performance are critical.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating fittings are clean and free of debris. 2. Apply appropriate sealant or thread tape to male threads if applicable. 3. Securely fasten the pipe into the fitting, ensuring a watertight or airtight seal.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to material deformation or cracking. | Tighten fittings to manufacturer's recommended torque specifications or hand-tighten plus a quarter turn for non-threaded connections. |
| Exposing the pipe to temperatures or chemicals outside its rated operational limits. | Verify the chemical compatibility and temperature rating of the Nylon pipe against the intended application media and environment. |
A: This Seamless Pipe, Schedule 80 is manufactured from Nylon.
A: Industrial fluid transfer lines, Pneumatic control systems, Hydraulic lines, Chemical processing, Automotive fluid systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||