This 6" Schedule 40 seamless nylon pipe offers exceptional durability and chemical resistance. Engineered for high-pressure environments, it provides a reliable fluid conveyance solution for critical industrial systems.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Pipe Size | 6.0" |
| Outside Diameter | 4.222" |
| Wall Thickness | 0.402" |
Built to exacting engineering tolerances, this 6.0" nominal size seamless nylon pipe features a precise 4.222" outside diameter and a robust 0.402" wall thickness, conforming to Schedule 40 dimensional standards. Crafted from high-grade nylon, it exhibits excellent tensile strength, abrasion resistance, and superior performance in corrosive environments. Its smooth internal surface minimizes pressure drop and facilitates efficient flow. Ideal for hydraulic lines, pneumatic systems, chemical transport, and agricultural irrigation.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure pipe ends are clean, deburred, and free of contaminants. 2. Apply appropriate solvent cement and primer to both the pipe end and fitting socket. 3. Insert pipe into fitting with a slight twist and hold for 30 seconds to set. 4. Allow adequate cure time before pressurizing the system.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect solvent cement for nylon, leading to joint failure. | Always use solvent cement specifically formulated for nylon pipe and fittings. |
| Insufficient cure time before system operation, resulting in leaks. | Adhere strictly to the manufacturer's recommended cure times based on ambient temperature and humidity. |
A: This Seamless Pipe, Schedule 40 is manufactured from Nylon.
A: High-pressure hydraulic systems, Pneumatic conveyance, Chemical and solvent transfer, Agricultural irrigation systems, Industrial fluid handling.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||