Engineered for demanding industrial environments, this Nylon Schedule 40 seamless pipe offers exceptional chemical resistance and durability. Its robust construction ensures reliable performance in critical fluid transfer and pressure applications.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Pipe Size | 5.9" |
| Outside Diameter | 4.066" |
| Wall Thickness | 0.463" |
A high-performance industrial component, this Nylon Schedule 40 seamless pipe is manufactured to rigorous standards for superior integrity. Featuring a nominal pipe size of 5.9", an outside diameter of 4.066", and a substantial wall thickness of 0.463", it provides exceptional structural strength. Nylon's inherent properties, including excellent abrasion resistance, low coefficient of friction, and resistance to a broad range of chemicals and solvents, make this pipe suitable for conveying aggressive media and operating under moderate pressure conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure pipe ends are clean and free of debris. 2. Apply appropriate primer and solvent cement to both the pipe end and the fitting socket. 3. Insert the pipe into the fitting with a slight twisting motion until it bottoms out. 4. Hold the pipe and fitting together for the recommended cure time to ensure a strong bond.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect solvent cement for nylon. | Always use solvent cement specifically formulated for nylon pipe and fittings to ensure proper fusion. |
| Inadequate cure time before pressurizing. | Allow the solvent cement to cure fully according to manufacturer recommendations before introducing any pressure to the system. |
A: This Seamless Pipe, Schedule 40 is manufactured from Nylon.
A: Hydraulic fluid lines, Chemical processing, Pneumatic systems, Automotive fuel lines.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||