This Nylon Schedule 40 seamless pipe offers excellent chemical resistance and durability. Engineered for reliable performance in demanding industrial environments, it ensures efficient fluid and pneumatic system operation.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Pipe Size | 5.8" |
| Outside Diameter | 1.343" |
| Wall Thickness | 0.122" |
A proven choice for industrial professionals, this 5.8-inch inside diameter Nylon seamless pipe adheres to Schedule 40 dimensions, boasting a precise 1.343-inch outside diameter and a robust 0.122-inch wall thickness. Fabricated from high-grade Nylon, it exhibits superior tensile strength, abrasion resistance, and compatibility with a broad spectrum of chemicals, making it ideal for high-pressure fluid conveyance, pneumatic lines, and applications requiring resistance to oils and solvents. Its seamless construction guarantees leak-free performance and uniform wall integrity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the pipe ends are clean and free of debris. 2. Apply appropriate solvent cement to both the pipe end and the fitting socket. 3. Insert the pipe into the fitting with a quarter-turn twist to ensure even cement distribution. 4. Hold firmly for 30 seconds to allow initial bonding.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect solvent cement for Nylon. | Always use a solvent cement specifically formulated for Nylon pipe to ensure proper fusion and a leak-proof seal. |
| Inadequate curing time before pressurizing the system. | Allow the solvent cement to cure fully according to the manufacturer's recommendations (typically 24-48 hours for full strength) before subjecting the system to operational pressure. |
A: This Seamless Pipe, Schedule 40 is manufactured from Nylon.
A: Pneumatic control systems, Fluid and hydraulic lines, Chemical and solvent transfer.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||