This 5.5" OD, Schedule 40 seamless nylon pipe delivers robust performance in demanding industrial environments. Its high strength and chemical inertness make it ideal for critical fluid conveyance.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Pipe Size | 5.5" |
| Outside Diameter | 6.223" |
| Wall Thickness | 0.331" |
Engineered for reliability and performance, this seamless nylon pipe meets stringent Schedule 40 dimensional requirements with a 5.5" nominal pipe size, a precise 6.223" outside diameter, and a substantial 0.331" wall thickness. Fabricated from high-grade Nylon 6/6 (or equivalent), it exhibits excellent tensile strength, abrasion resistance, and a broad operating temperature range. Its inherent chemical inertness provides superior resistance to many oils, fuels, solvents, and hydraulic fluids, ensuring longevity in aggressive media.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all mating surfaces are clean, dry, and free from debris. 2. Apply appropriate thread sealant or tape to male threads. 3. Hand-tighten the fitting onto the pipe, then tighten an additional 1-2 turns with a wrench, avoiding overtightening. 4. Verify system pressure and temperature ratings before operation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening fittings, leading to cracking or deformation of the nylon pipe. | Use a torque wrench set to manufacturer-specified values or follow hand-tighten plus quarter-turn guidelines carefully. |
| Using incompatible thread sealants or lubricants that can degrade nylon. | Consult the sealant manufacturer's compatibility chart or use sealants specifically approved for use with nylon. |
A: This Seamless Pipe, Schedule 40 is manufactured from Nylon.
A: Industrial fluid transfer systems, Pneumatic conveyance lines, Hydraulic fluid lines, Chemical processing piping.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||