Engineered for robust performance, this Nylon Schedule 40 seamless pipe delivers exceptional chemical resilience and superior flexibility. Its seamless construction ensures leak-free operation in critical fluid transfer systems.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Pipe Size | 4.9" |
| Outside Diameter | 3.203" |
| Wall Thickness | 0.217" |
Specified by design engineers worldwide, this 4.9-inch nominal size Nylon Schedule 40 seamless pipe boasts an exact outside diameter of 3.203 inches and a precise wall thickness of 0.217 inches. Manufactured from high-grade Nylon 6/6 (or equivalent), it exhibits excellent tensile strength, abrasion resistance, and a broad operating temperature range, making it ideal for conveying various chemicals, hydraulic fluids, and pneumatic systems where flexibility and durability are paramount. Its non-corrosive nature ensures longevity in challenging environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect pipe ends for damage or debris. 2. Ensure mating fittings are clean and compatible. 3. Assemble pipe and fitting using appropriate joining method (e.g., solvent welding, compression fitting) according to manufacturer guidelines.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect solvent for Nylon pipe | Always use a solvent specifically formulated for Nylon to ensure proper bonding and prevent material degradation. |
| Over-tightening compression fittings | Hand-tighten compression fittings and then apply an additional 1/4 to 1/2 turn with a wrench to avoid deforming the pipe and compromising the seal. |
A: This Seamless Pipe, Schedule 40 is manufactured from Nylon.
A: Chemical transfer lines, Hydraulic and pneumatic systems, Automotive fluid lines.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||