This robust Nylon Schedule 40 seamless pipe is engineered for superior performance in challenging industrial settings. Its precise dimensions and nylon material ensure reliable fluid transfer and long-term durability.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Pipe Size | 3.7" |
| Outside Diameter | 5.721" |
| Wall Thickness | 0.391" |
Designed for demanding industrial environments, this 3.7" IPS (Iron Pipe Size) Nylon Schedule 40 seamless pipe boasts an outside diameter of 5.721" and a substantial wall thickness of 0.391". Manufactured from high-grade nylon, it exhibits excellent resistance to a wide range of chemicals, abrasion, and impact, making it ideal for demanding fluid conveyance systems in chemical processing, agriculture, and manufacturing. The seamless construction guarantees uniform wall thickness and high burst strength.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all mating surfaces are clean and free of debris. 2. Apply appropriate solvent cement and primer to both the pipe end and fitting socket. 3. Insert pipe with a slight twisting motion until it bottoms out in the fitting. 4. Hold firmly for 30 seconds to prevent slippage during initial cure.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong type of solvent cement or primer for nylon. | Always use solvent cement and primer specifically formulated for nylon piping systems as recommended by the manufacturer. |
| Insufficient curing time before pressurizing the system. | Allow the solvent-welded joints to cure for the manufacturer-specified minimum time before introducing fluid or pressure to the system. |
A: This Seamless Pipe, Schedule 40 is manufactured from Nylon.
A: Chemical processing fluid lines, Agricultural irrigation and chemical distribution, Pneumatic conveying systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||