This robust Nylon Schedule 40 seamless pipe offers exceptional chemical resistance and durability for critical industrial fluid transfer and pneumatic applications.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Pipe Size | 2.8" |
| Outside Diameter | 3.549" |
| Wall Thickness | 0.206" |
A high-performance industrial component, this Nylon Schedule 40 seamless pipe is engineered for demanding environments. Featuring a nominal pipe size of 2.8 inches, it boasts an precise outside diameter of 3.549 inches and a substantial wall thickness of 0.206 inches. The inherent properties of nylon, such as excellent abrasion resistance, flexibility, and compatibility with a wide range of chemicals and solvents, make it ideal for high-pressure pneumatic systems, hydraulic lines, and fluid conveyance where reliability is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all mating surfaces are clean and free from debris. 2. Apply appropriate sealant or tape to threaded connections if applicable. 3. Securely fasten the pipe using compatible fittings, ensuring a leak-proof seal.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect fittings that are not rated for nylon pipe or the specified pressure. | Always use fittings specifically designed for nylon pipe and rated for the operating pressure and temperature of the system. |
| Over-tightening connections, which can damage the nylon pipe wall or fittings. | Hand-tighten connections and then apply an additional quarter to half turn with a wrench, or follow manufacturer-specified torque values. |
A: This Seamless Pipe, Schedule 40 is manufactured from Nylon.
A: Pneumatic control systems, Hydraulic fluid lines, Chemical and solvent transfer, Industrial automation.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||