This Nylon Schedule 40 seamless pipe offers superior chemical resistance and durability for demanding fluid transfer applications. Its robust construction ensures reliable performance in various industrial environments.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Pipe Size | 1.2" |
| Outside Diameter | 3.183" |
| Wall Thickness | 0.354" |
Engineered for reliability and performance, this 1.2" OD Nylon seamless pipe conforms to Schedule 40 dimensions, featuring a substantial 0.354" wall thickness. Manufactured from high-grade Nylon, it exhibits excellent resistance to a broad spectrum of chemicals, abrasion, and moderate impact. This material choice facilitates long service life in systems conveying non-corrosive fluids, air, or for use in low-pressure hydraulic lines and pneumatic systems where flexibility and durability are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure pipe ends are clean and free from debris. 2. Cut pipe to required length using a sharp, appropriate pipe cutter. 3. Deburr both the inside and outside edges of the cut ends. 4. Connect pipe to fittings using appropriate joining methods (e.g., solvent welding, compression fittings), following manufacturer guidelines.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong type of solvent for Nylon pipe. | Consult the fitting manufacturer's recommendations for the specific solvent required for Nylon pipe bonding. Always test in an inconspicuous area if unsure. |
| Over-tightening compression fittings, which can deform the pipe. | Hand-tighten compression fittings initially, then use a wrench for a final quarter to half turn. Avoid excessive force that could crush the pipe or fitting. |
A: This Seamless Pipe, Schedule 40 is manufactured from Nylon.
A: Low-pressure fluid and air transfer, Pneumatic lines, Chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||