This Schedule 160 seamless nylon pipe offers exceptional strength and chemical resistance for demanding industrial applications. Engineered for reliability and long service life.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Pipe Size | 0.9" |
| Outside Diameter | 3.756" |
| Wall Thickness | 0.103" |
Precision-manufactured to tight tolerances, this 0.9" ID seamless nylon pipe features an outside diameter of 3.756" and a robust 0.103" wall thickness, corresponding to Schedule 160. Crafted from high-grade nylon, it exhibits excellent tensile strength, abrasion resistance, and superior performance in environments requiring resistance to a wide range of chemicals, oils, and solvents. Its smooth internal surface minimizes flow restriction and friction. Suitable for fluid conveyance, pneumatic systems, and hydraulic lines where pressure containment and material integrity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure pipe ends are clean and free of debris. 2. Apply appropriate solvent cement and primer to both the pipe end and fitting socket. 3. Insert pipe into fitting with a slight twisting motion until it bottoms out. 4. Hold firmly for 30 seconds to prevent slippage, then allow adequate cure time per manufacturer's instructions before pressurization.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect solvent cement for nylon. | Always use a solvent cement specifically formulated for nylon to ensure proper bonding and prevent material degradation. |
| Insufficient cure time before system operation. | Adhere strictly to the recommended cure times for the solvent cement to achieve full joint strength. |
A: This Seamless Pipe, Schedule 160 is manufactured from Nylon.
A: High-pressure fluid transfer, Pneumatic and hydraulic systems, Chemical processing lines.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||