This industrial O-ring, constructed from high-performance Buna-N, provides exceptional sealing capabilities. Its precision dimensions ensure a tight fit, preventing leaks in critical applications.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 6.102" |
| Outside Diameter | 1.237" |
| Cross Section | 0.077" |
Engineered for reliability and performance, this Buna-N O-ring features an Inside Diameter of 6.102 inches, an Outside Diameter of 1.237 inches, and a Cross Section of 0.077 inches. Buna-N (Nitrile) offers excellent resistance to oils, fuels, hydraulic fluids, and a wide range of solvents, making it suitable for moderate temperature applications up to 212°F (100°C). Its inherent flexibility and resilience allow it to conform effectively to sealing surfaces, ensuring a leak-proof seal under pressure.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating grooves are clean and free of debris. 2. Lightly lubricate the O-ring with a compatible lubricant. 3. Carefully install the O-ring into the groove, avoiding stretching or twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-stretching the O-ring during installation | Install the O-ring without excessive tension, allowing it to seat naturally. |
| Using incompatible lubricants | Always consult material compatibility charts for lubricants suitable for Buna-N. |
A: This Industrial O-Ring, Buna-N is manufactured from Nylon.
A: Hydraulic systems, Pneumatic systems, Automotive fuel systems, Oil and gas equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||