This robust industrial O-ring, constructed from high-performance Nylon, ensures reliable sealing in critical environments. Its precise dimensions and material properties offer superior durability and resistance to wear and tear.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 5.554" |
| Outside Diameter | 9.380" |
| Cross Section | 0.188" |
Manufactured under strict quality controls, this Nylon O-ring boasts a precise Inside Diameter of 5.554 inches and an Outside Diameter of 9.380 inches, with a 0.188-inch cross-section. Nylon offers exceptional mechanical strength, abrasion resistance, and a low coefficient of friction, making it ideal for dynamic sealing applications. Its inherent chemical resistance allows for use in environments with exposure to mild oils, greases, and certain solvents. This O-ring is engineered for long-term performance under moderate pressure and temperature conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove is clean, free of debris, and has smooth surfaces. 2. Carefully inspect the O-ring for any nicks, cuts, or defects before installation. 3. Lubricate the O-ring and groove lightly with a compatible lubricant to facilitate installation and prevent damage. Avoid over-lubrication.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overstretching the O-ring during installation. | Gently roll or slide the O-ring into the groove. Avoid excessive pulling or stretching which can lead to premature failure. |
| Using incompatible lubricants. | Always verify that the lubricant is compatible with Nylon and the service media to prevent swelling or degradation of the O-ring. |
| Installing on a damaged or dirty groove. | Thoroughly clean and inspect the groove for sharp edges, burrs, or contaminants that could damage the O-ring during installation or operation. |
A: This Industrial O-Ring, Buna-N is manufactured from Nylon.
A: Hydraulic and pneumatic systems, Automotive components, Industrial machinery sealing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||