High-performance Buna-N O-ring engineered with a nylon reinforcement for enhanced durability and reduced friction. Ideal for static and dynamic sealing applications.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 6.576" |
| Outside Diameter | 1.137" |
| Cross Section | 0.175" |
Built to exacting engineering tolerances, this Buna-N O-ring features a precise 6.576" inside diameter, 1.137" outside diameter, and a 0.175" cross-section. The robust Buna-N (Nitrile Butadiene Rubber) material offers excellent resistance to oils, fuels, and hydraulic fluids, while the integrated nylon provides increased tensile strength and improved wear characteristics. This combination ensures a reliable seal in high-pressure systems and environments prone to abrasion, maintaining its sealing integrity over a wide temperature range. Its Shore A hardness of 70 Durometer ensures optimal compression for a leak-proof fit.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean, dry, and free from debris or damage. 2. Carefully stretch the O-ring over the component, avoiding excessive force or sharp tools that could nick or cut the material. 3. Once seated, verify that the O-ring is properly positioned within the groove and exhibits even compression.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring damage. | Gently stretch the O-ring and utilize a lubricant compatible with Buna-N if necessary to facilitate installation without compromise. |
| Installing into a dirty or damaged groove, compromising the seal. | Thoroughly inspect and clean the sealing groove before installing the O-ring. |
A: This Industrial O-Ring, Buna-N is manufactured from Nylon.
A: Hydraulic Systems, Pneumatic Systems, Automotive Sealing, Industrial Machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||