This industrial O-ring, constructed from advanced Silicone with Nylon reinforcement, provides exceptional sealing performance in challenging environments. Its precise dimensions ensure a reliable, long-lasting seal for critical applications.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 4.601" |
| Outside Diameter | 2.940" |
| Cross Section | 0.170" |
Specified by design engineers worldwide, this Silicone O-ring with Nylon reinforcement offers superior chemical resistance and thermal stability, ideal for applications requiring robust sealing. The precise dimensions of 4.601" inside diameter, 2.940" outside diameter, and a 0.170" cross-section ensure a precise fit and reliable sealing in dynamic and static applications. The Nylon reinforcement enhances tensile strength and extrusion resistance, making it suitable for high-pressure systems and demanding industrial environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean, free from debris, and properly lubricated with a compatible lubricant. 2. Carefully stretch the O-ring over the component, avoiding excessive force or sharp tools that could damage the material. 3. Gently seat the O-ring into its designated groove, ensuring it is uniformly positioned and not twisted.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to stretching or tearing of the O-ring. | Apply gentle pressure and use appropriate tools to avoid damaging the O-ring's integrity. |
| Installing the O-ring into a dirty or unlubricated groove, which can cause premature wear and sealing failure. | Thoroughly clean the groove and apply a thin layer of compatible lubricant before installation. |
A: This Industrial O-Ring, Silicone is manufactured from Nylon.
A: High-pressure hydraulic systems, Chemical processing equipment, Automotive engine components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||