This high-performance Nylon Industrial O-Ring is engineered for demanding environments. Its robust construction ensures reliable sealing in critical industrial systems, preventing leaks and maintaining operational integrity.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 9.910" |
| Outside Diameter | 3.649" |
| Cross Section | 0.209" |
Purpose-built for heavy-duty applications, this Silicone O-Ring boasts an Inside Diameter of 9.910 inches, an Outside Diameter of 3.649 inches, and a Cross Section of 0.209 inches. Fabricated from high-grade Nylon, it exhibits exceptional tensile strength, abrasion resistance, and a broad operating temperature range, making it ideal for hydraulic systems, pneumatic equipment, and high-pressure fluid handling where robust sealing is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the groove is clean and free of debris. 2. Carefully stretch the O-ring over the component, avoiding excessive force. 3. Seat the O-ring fully into its designated groove, verifying uniform contact.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening fasteners, compressing the O-ring excessively. | Adhere to specified torque values for mating components to prevent premature failure. |
| Using sharp tools during installation, causing nicks or cuts. | Employ smooth, rounded installation tools or hand-fitting techniques to protect the O-ring surface. |
A: This Industrial O-Ring, Silicone is manufactured from Nylon.
A: Hydraulic Cylinder Seals, Pneumatic Actuator Seals, High-Pressure Fluid Transfer.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||