This robust industrial O-ring, fabricated from durable Nylon, offers exceptional sealing performance in challenging environments. Its precise dimensions ensure a reliable seal for critical applications.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 2.428" |
| Outside Diameter | 3.828" |
| Cross Section | 0.146" |
Specified by design engineers worldwide, this Nylon industrial O-ring is engineered for superior performance and longevity. With an inside diameter of 2.428 inches, an outside diameter of 3.828 inches, and a precise cross-section of 0.146 inches, it meets stringent sealing requirements. Nylon's inherent properties, including excellent abrasion resistance and moderate chemical resistance, make it ideal for applications involving dynamic loads and exposure to certain solvents and oils. This material offers a good balance of mechanical strength and flexibility for effective static and dynamic sealing.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove is clean, dry, and free of burrs. 2. Carefully lubricate the O-ring and the groove with a compatible lubricant if recommended for the application. 3. Install the O-ring without stretching or twisting, ensuring it seats fully within the groove.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overstretching the O-ring during installation | Install the O-ring without excessive tension to prevent premature failure and loss of sealing force. |
| Using an incompatible lubricant | Always consult material compatibility charts to select a lubricant that will not degrade the Nylon O-ring. |
| Installing into a dirty or damaged groove | Thoroughly clean and inspect the groove for any imperfections that could compromise the seal. |
A: This Industrial O-Ring, Silicone is manufactured from Nylon.
A: Hydraulic systems, Pneumatic cylinders, Automotive components, Industrial machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||