This high-performance Nylon O-ring provides robust sealing for demanding industrial environments. Engineered for resilience, it ensures reliable performance under pressure and chemical exposure.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 2.550" |
| Outside Diameter | 6.936" |
| Cross Section | 0.151" |
Manufactured under strict quality controls, this industrial O-ring is constructed from high-grade Nylon, offering exceptional tensile strength and abrasion resistance. With an Inside Diameter of 2.550 inches, an Outside Diameter of 6.936 inches, and a precise Cross Section of 0.151 inches, it is designed for leak-proof sealing in hydraulic and pneumatic systems, automotive applications, and general industrial machinery where durability and chemical inertness are paramount. Its material composition allows for operation within a moderate temperature range.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean, dry, and free from burrs or sharp edges. 2. Carefully lubricate the O-ring with a compatible lubricant to prevent damage during installation. 3. Install the O-ring into the groove, ensuring it is seated evenly and without twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, which can nick or cut the O-ring. | Apply gentle, even pressure and utilize a non-metallic installation tool if necessary. |
| Installing the O-ring into a dirty or damaged groove. | Thoroughly inspect and clean the groove before O-ring installation. Repair any damage to the groove surface. |
A: This Industrial O-Ring, Silicone is manufactured from Nylon.
A: Hydraulic Systems, Pneumatic Cylinders, Automotive Fuel Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||