This robust industrial O-ring, constructed from high-grade nylon, is engineered for superior sealing in demanding environments. Its precise dimensions ensure a reliable, leak-proof fit in critical applications.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 7.141" |
| Outside Diameter | 3.805" |
| Cross Section | 0.203" |
A high-performance industrial component, this O-ring features an inside diameter of 7.141 inches, an outside diameter of 3.805 inches, and a cross-section of 0.203 inches. Fabricated from durable nylon, it offers excellent tensile strength, abrasion resistance, and a broad operating temperature range, making it ideal for static and dynamic sealing applications in hydraulic, pneumatic, and general industrial systems where mechanical integrity and resistance to wear are paramount. Its material composition provides good resistance to moderate chemicals and solvents.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the groove and mating surfaces are clean and free of debris. 2. Carefully stretch the O-ring over the component, avoiding sharp tools. 3. Position the O-ring within the designated groove, ensuring it is seated evenly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to tearing or nicking the O-ring. | Apply gentle, even pressure and utilize appropriate lubrication if necessary. Consider specialized installation tools for complex assemblies. |
| Incorrect O-ring size selection, resulting in leaks or premature failure. | Verify the groove dimensions and O-ring specifications meticulously before ordering and installation. Consult engineering drawings for precise requirements. |
A: This Industrial O-Ring, Silicone is manufactured from Nylon.
A: Hydraulic cylinder sealing, Pneumatic actuator seals, Industrial pump and valve gaskets.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||