This industrial O-ring, constructed from robust Nylon, offers exceptional sealing capabilities in demanding environments. Its precise dimensions ensure a secure fit for critical applications.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 4.788" |
| Outside Diameter | 2.875" |
| Cross Section | 0.071" |
Engineered for reliability and performance, this industrial O-ring features a nominal inside diameter of 4.788 inches and an outside diameter of 2.875 inches, with a precise 0.071-inch cross-section. Constructed from high-grade Nylon, it exhibits excellent tensile strength, abrasion resistance, and a broad operating temperature range, making it suitable for applications involving moderate pressure and chemical exposure. This material choice ensures long-term sealing integrity and resilience against wear and tear in industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean, free of debris, and properly machined. 2. Carefully stretch the O-ring over the component, avoiding excessive force or sharp tools. 3. Seat the O-ring fully within the groove, ensuring no twists or damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening or stretching the O-ring during installation. | Use proper installation tools and techniques to avoid overstretching, which can lead to premature failure. |
| Installing the O-ring into a dirty or damaged groove. | Thoroughly clean and inspect the sealing groove for any imperfections before O-ring installation. |
A: This Industrial O-Ring, Silicone is manufactured from Nylon.
A: Hydraulic and Pneumatic Systems, Automotive Components, Industrial Machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||