This robust Nylon O-ring provides reliable sealing in challenging industrial applications. Engineered for durability, it offers excellent resistance to abrasion and chemical degradation, ensuring extended service life under pressure.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 6.545" |
| Outside Diameter | 1.961" |
| Cross Section | 0.222" |
Designed for demanding industrial environments, this Nylon O-ring exhibits superior mechanical strength and abrasion resistance, making it suitable for high-pressure systems. With an Inside Diameter of 6.545 inches, an Outside Diameter of 1.961 inches, and a Cross Section of 0.222 inches, its dense nylon composition effectively seals against a wide range of fluids and gases, preventing leaks and ensuring system integrity. Ideal for hydraulic and pneumatic assemblies, as well as pump and valve applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect the groove and mating surfaces for cleanliness and damage. 2. Carefully stretch the O-ring over the component, ensuring it seats evenly within the groove without twisting. 3. Apply a thin layer of compatible lubricant if recommended for the specific application to facilitate installation and prevent damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening fasteners, leading to O-ring extrusion or damage. | Adhere to specified torque values for all fasteners to ensure proper compression without overstressing the O-ring. |
| Twisting the O-ring during installation, causing premature failure. | Ensure the O-ring is installed straight and flat within the groove. Use appropriate tools or lubrication if necessary. |
A: This Industrial O-Ring, Silicone is manufactured from Nylon.
A: Hydraulic Systems, Pneumatic Actuators, Pump and Valve Seals.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||