Engineered for exceptional durability, this Nylon O-Ring provides superior sealing performance in critical industrial applications. Its robust material composition ensures reliability under extreme conditions.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 5.020" |
| Outside Diameter | 2.100" |
| Cross Section | 0.103" |
Designed for demanding industrial environments, this O-ring is manufactured from high-grade Nylon, offering excellent resistance to abrasion, chemicals, and high temperatures. With a precise Inside Diameter of 5.020 inches, an Outside Diameter of 2.100 inches, and a Cross Section of 0.103 inches, it guarantees a tight and secure seal in dynamic and static applications. This material is chosen for its mechanical strength and ability to withstand pressure and wear, making it suitable for hydraulic systems, pneumatic assemblies, and general fluid containment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean and free from debris or burrs. 2. Lubricate the O-ring and the groove lightly with a compatible lubricant. 3. Carefully install the O-ring into the groove, avoiding stretching or twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring damage. | Apply gentle, even pressure and avoid stretching or twisting the O-ring excessively. |
| Improper groove preparation, leaving contaminants that compromise the seal. | Thoroughly clean the groove and inspect for any damage before installation. |
A: This Industrial O-Ring, Silicone is manufactured from Nylon.
A: Hydraulic Systems, Pneumatic Assemblies, Fluid Power Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||