This industrial-grade Silicone O-Ring offers superior sealing performance in challenging conditions. Engineered with a durable Nylon reinforcement, it ensures reliability and longevity in critical applications.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 1.913" |
| Outside Diameter | 10.497" |
| Cross Section | 0.226" |
Designed for demanding industrial environments, this Silicone O-Ring (Material: Nylon) boasts exceptional resilience and chemical resistance. With an Inside Diameter of 1.913", an Outside Diameter of 10.497", and a 0.226" cross-section, it is suitable for high-pressure and extreme temperature applications. The Nylon component enhances its structural integrity, preventing extrusion and increasing tear resistance. Its inherent flexibility and low compression set make it ideal for static and dynamic sealing in pumps, valves, and hydraulic systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean and free from debris. 2. Carefully stretch the O-ring over the component, avoiding any sharp tools that could cause damage. 3. Seat the O-ring fully within the groove, ensuring it is not twisted.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to cuts or nicks. | Apply a thin layer of compatible lubricant to the O-ring and groove to facilitate easier installation and prevent damage. |
| Installing a twisted O-ring, which will compromise the seal. | Visually inspect the O-ring to ensure it is seated flat and without any twists before assembling the mating components. |
A: This Industrial O-Ring, Silicone is manufactured from Nylon.
A: Hydraulic Systems, Pneumatic Actuators, Chemical Processing Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||