Engineered for robust performance, this industrial O-ring features a high-strength nylon construction. Its precise dimensions ensure a secure seal in critical applications, offering exceptional durability and resistance.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 4.592" |
| Outside Diameter | 3.517" |
| Cross Section | 0.129" |
A proven choice for industrial professionals, this O-ring is manufactured from high-performance nylon, renowned for its excellent tensile strength, abrasion resistance, and low coefficient of friction. The precise internal diameter of 4.592 inches, coupled with an outside diameter of 3.517 inches and a cross-section of 0.129 inches, guarantees a reliable and leak-proof seal in demanding environments. This material's inherent properties make it suitable for a wide range of industrial applications where mechanical integrity and long-term sealing are paramount, including hydraulic systems, pneumatic assemblies, and fluid transfer lines.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove surfaces are clean and free of debris. 2. Carefully stretch the O-ring over the component, avoiding excessive force or sharp tools. 3. Gently seat the O-ring into the groove, ensuring it is properly positioned and not twisted.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening fasteners, which can crush the O-ring. | Adhere to specified torque values for all fasteners to prevent O-ring compression damage. |
| Using incorrect O-ring size for the groove. | Always verify O-ring dimensions (ID, OD, CS) against the groove specifications before installation. |
A: This Industrial O-Ring, Silicone is manufactured from Nylon.
A: Hydraulic cylinder seals, Pneumatic actuator seals, Fluid power systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||