Engineered for high-performance sealing, this Nylon industrial O-ring offers exceptional durability and resistance to abrasion. Its precise dimensions ensure a reliable seal in critical applications.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 4.475" |
| Outside Diameter | 5.808" |
| Cross Section | 0.166" |
Trusted by engineers across multiple sectors, this industrial O-ring is manufactured from high-grade Nylon, renowned for its superior tensile strength, abrasion resistance, and chemical inertness, especially against oils and greases. With an inside diameter of 4.475 inches, an outside diameter of 5.808 inches, and a 0.166-inch cross-section, it is designed for robust sealing in demanding environments where dimensional stability and mechanical integrity are paramount. Typical applications include automotive components, hydraulic systems, and industrial machinery.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove is clean and free of debris. 2. Carefully stretch the O-ring over the component and into the groove, avoiding excessive force or sharp tools. 3. Verify the O-ring is properly seated and not twisted within the groove.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overstretching the O-ring during installation. | Use appropriate installation tools or techniques to minimize stretching and prevent damage to the O-ring. |
| Installing the O-ring into a contaminated groove. | Thoroughly clean the groove to remove any particulate matter or residue that could compromise the seal. |
A: This Industrial O-Ring, Silicone is manufactured from Nylon.
A: Automotive Engine Components, Hydraulic and Pneumatic Systems, Industrial Machinery and Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||