Engineered for robust performance, this industrial-grade Nylon O-ring provides superior sealing in challenging applications. Its resilient material ensures reliable containment of fluids and gases under pressure.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 3.432" |
| Outside Diameter | 7.906" |
| Cross Section | 0.219" |
Designed for demanding industrial environments, this Nylon O-ring features a precise Inside Diameter of 3.432", an Outside Diameter of 7.906", and a Cross Section of 0.219". The inherent strength and thermal stability of Nylon make it ideal for applications requiring resistance to abrasion, moderate chemicals, and a wide temperature range. Its low coefficient of friction aids in smooth operation within dynamic sealing systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove is clean and free of debris. 2. Carefully lubricate the O-ring and groove with a compatible lubricant. 3. Install the O-ring, avoiding twisting or stretching beyond its elastic limit.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect lubrication, leading to material degradation. | Consult the O-ring material compatibility chart for appropriate lubricants. |
| Over-stretching the O-ring during installation, causing premature failure. | Gently ease the O-ring into the groove without excessive tension. |
A: This Industrial O-Ring, Silicone is manufactured from Nylon.
A: Hydraulic Systems, Pneumatic Actuators, High-Pressure Valves.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||