Engineered for superior performance in critical sealing applications, this Nylon industrial O-ring provides robust containment under extreme pressure and chemical exposure.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 1.046" |
| Outside Diameter | 8.360" |
| Cross Section | 0.139" |
Purpose-built for heavy-duty applications, this industrial O-ring boasts an Inside Diameter of 1.046 inches, an Outside Diameter of 8.360 inches, and a Cross Section of 0.139 inches. Constructed from high-strength Nylon, it exhibits exceptional tensile strength, abrasion resistance, and a broad operating temperature range, making it ideal for hydraulic systems, pneumatic assemblies, and chemical processing equipment where consistent, reliable sealing is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean sealing surfaces thoroughly to remove any debris or lubricant. 2. Gently stretch the O-ring to fit over the shaft or into the groove, ensuring it is not twisted. 3. Verify the O-ring is seated evenly and without pinching before assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening fasteners, causing O-ring extrusion. | Adhere to specified torque values during assembly to prevent over-compression. |
| Using incompatible lubricants that degrade the Nylon material. | Consult material compatibility charts to select appropriate seal lubricants. |
A: This Industrial O-Ring, Silicone is manufactured from Nylon.
A: Hydraulic Cylinder Seals, Pneumatic Actuator Seals, Chemical Transfer Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||