This robust industrial O-ring, constructed from high-strength Nylon, provides exceptional sealing capabilities in demanding environments. Its precise dimensions ensure a secure fit and reliable containment.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 7.565" |
| Outside Diameter | 8.831" |
| Cross Section | 0.247" |
Engineered for reliability and performance, this industrial O-ring boasts a precise inside diameter of 7.565 inches, an outside diameter of 8.831 inches, and a cross-section of 0.247 inches. Fabricated from resilient Nylon, it offers excellent tensile strength, abrasion resistance, and a broad operating temperature range, making it suitable for high-pressure systems and dynamic sealing applications. Its inherent material properties contribute to long service life and consistent sealing performance in demanding industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean, dry, and free from debris or damage. 2. Carefully stretch the O-ring over the smaller diameter or into its groove, avoiding excessive force or sharp tools. 3. Verify the O-ring is properly seated and not twisted or pinched within the sealing cavity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening fasteners, which can compress the O-ring beyond its elastic limit and cause permanent deformation. | Follow torque specifications for fasteners and ensure even pressure distribution across the sealing surface. |
| Using the wrong O-ring material for the fluid or operating temperature, leading to premature degradation and seal failure. | Consult chemical compatibility charts and operating temperature ranges to select the appropriate O-ring material for the specific application. |
A: This Industrial O-Ring, Silicone is manufactured from Nylon.
A: Hydraulic systems, Pneumatic cylinders, Fluid power transmission.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||