This high-performance industrial O-ring, constructed from robust Nylon, offers exceptional durability and a reliable seal. Engineered for demanding applications, it ensures integrity under pressure and resistance to wear.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 1.123" |
| Outside Diameter | 8.101" |
| Cross Section | 0.256" |
Trusted by engineers across multiple sectors, this industrial O-ring features a precise Inside Diameter of 1.123 inches, an Outside Diameter of 8.101 inches, and a 0.256-inch Cross Section. Fabricated from a high-grade Nylon compound, it exhibits superior tensile strength, abrasion resistance, and a broad operating temperature range, making it ideal for static and dynamic sealing applications where mechanical stress and wear are significant factors. Its inherent rigidity provides excellent extrusion resistance in moderate pressure environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect the groove and mating surfaces for cleanliness and damage. 2. Carefully place the O-ring into the designated groove, ensuring no twisting or stretching. 3. Verify proper seating and compression of the O-ring before assembly completion.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening fasteners, leading to excessive compression and premature failure. | Adhere to torque specifications for fasteners to avoid crushing the O-ring. |
| Using excessive lubricant, which can degrade Nylon over time. | Apply only a thin, compatible lubricant approved for Nylon seals. |
A: This Industrial O-Ring, Silicone is manufactured from Nylon.
A: Hydraulic systems, Pneumatic cylinders, Fluid power components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||