This industrial-grade Silicone O-ring, manufactured with a Nylon reinforcement, provides superior sealing performance. Its precise dimensions ensure a reliable seal in demanding environments.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 0.163" |
| Outside Diameter | 0.955" |
| Cross Section | 0.214" |
Built to exacting engineering tolerances, this Silicone O-ring features an Inside Diameter of 0.163 inches, an Outside Diameter of 0.955 inches, and a Cross Section of 0.214 inches. The Nylon reinforcement enhances its tensile strength and abrasion resistance, making it suitable for higher pressure applications and improved dimensional stability compared to standard silicone. Its inherent silicone properties offer excellent flexibility, a wide operating temperature range, and resistance to many chemicals, weathering, and ozone.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove and mating surfaces are clean and free of debris. 2. Carefully stretch the O-ring over the component, avoiding excessive force that could damage the material. 3. Gently seat the O-ring into its designated groove, ensuring an even distribution and no twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overstretching the O-ring during installation. | Gently work the O-ring into place, using lubrication if necessary, to prevent permanent deformation and premature failure. |
| Installing on a contaminated or damaged sealing surface. | Thoroughly clean and inspect all mating surfaces for nicks, burrs, or corrosion before installation to guarantee a proper seal. |
A: This Industrial O-Ring, Silicone is manufactured from Nylon.
A: Automotive fluid systems, Industrial fluid power, High-pressure hydraulic seals, Medical equipment sealing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||