This industrial O-ring, crafted from robust Nylon, provides exceptional sealing performance. Its precision dimensions ensure a secure fit in critical applications, offering superior durability and chemical resistance.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 0.997" |
| Outside Diameter | 0.946" |
| Cross Section | 0.122" |
Specified by design engineers worldwide, this Nylon industrial O-ring offers a precise Inside Diameter of 0.997 inches, an Outside Diameter of 0.946 inches, and a Cross Section of 0.122 inches. The inherent properties of Nylon, including its excellent tensile strength, high abrasion resistance, and good chemical compatibility with many industrial fluids, make this seal ideal for applications requiring robust performance under moderate pressure and temperature conditions. Its rigidity contributes to superior dimensional stability and resistance to extrusion.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the groove is clean and free of debris. 2. Carefully stretch the O-ring over the fitting or shaft, avoiding excessive force. 3. Position the O-ring within the designated groove, ensuring it is seated evenly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening during installation, leading to permanent deformation. | Install with minimal necessary tension, allowing the O-ring to compress naturally into the groove. |
| Using the wrong O-ring size for the groove, resulting in leakage or extrusion. | Verify all O-ring dimensions (ID, OD, CS) against the groove specifications before installation. |
A: This Industrial O-Ring, Silicone is manufactured from Nylon.
A: Hydraulic systems, Pneumatic equipment, Automotive components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||