Engineered from high-performance nylon, this M9x18mm hex head cap screw offers exceptional dielectric strength and corrosion resistance. Its robust construction ensures reliable fastening in environments where traditional metal fasteners fail.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Size | M9 |
| Length | 18mm |
| Head Width | 28mm |
Precision-manufactured to tight tolerances, this M9x18mm hex head cap screw is constructed from a high-density nylon composite, offering superior resistance to a wide range of chemicals, solvents, and moisture. The M9 thread size ensures compatibility with standard M9 mating components, while the 18mm length provides ample engagement. The generous 28mm head width distributes load effectively, minimizing stress on mating surfaces. Its inherent non-magnetic and non-conductive properties make it ideal for electrical insulation and applications requiring non-ferrous materials. The nylon material also provides inherent vibration dampening capabilities.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean both the screw threads and the receiving threaded hole to remove any debris. 2. Insert the nylon hex head cap screw into the desired location. 3. Tighten the screw using an appropriately sized wrench, applying moderate torque to avoid stripping or overstressing the nylon material.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M9 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M9 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nylon screw, leading to thread stripping or material deformation. | Use a torque wrench or hand-tighten with moderate pressure, respecting the material's properties. |
| Using a metal wrench that could scratch or damage the nylon head. | Employ a plastic or nylon-coated wrench, or exercise extreme care to prevent surface damage. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical enclosures and control panels, Medical equipment and devices, Food processing machinery, Corrosive chemical environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||