Engineered for robust performance, this M8 x 64mm Nylon Hex Head Cap Screw offers superior corrosion resistance and electrical insulation. Its precise dimensions ensure secure and reliable fastening in demanding applications.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Size | M8 |
| Length | 64mm |
| Head Width | 20mm |
Precision-manufactured to tight tolerances, this M8 x 64mm hex head cap screw is constructed from high-strength nylon, offering excellent chemical resistance to a wide range of solvents, acids, and alkalis. The material's inherent dielectric properties make it ideal for electrical and electronic assemblies, preventing short circuits and providing isolation. With a head width of 20mm, it provides ample bearing surface for secure tightening. The M8 thread pitch ensures compatibility with standard metric hardware, and the 64mm length allows for versatile assembly configurations in environments where metal fasteners may degrade or interfere.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select the appropriate mating nut or tapped hole with M8 threading. 2. Hand-thread the nylon cap screw into the receiving component to avoid cross-threading. 3. Tighten using a suitable wrench or socket on the hex head, applying torque until snug. Avoid overtightening to prevent thread stripping or material deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M8 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M8 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening the nylon screw, leading to stripped threads or cracked head. | Apply only the necessary torque for a secure connection, mindful of the material's lower tensile strength compared to metal fasteners. |
| Using the nylon screw in applications exceeding its temperature or load-bearing limits. | Verify the application's environmental conditions and mechanical stress against the nylon material's specifications before installation. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical enclosures and control panels, Chemical processing equipment, Medical device assemblies, Corrosive environmental applications.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||