This Nylon Deep Groove Ball Bearing offers a lightweight and corrosion-resistant solution for power transmission. Its advanced polymer construction ensures quiet operation and excellent performance in demanding industrial environments.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 85mm |
| Outside Diameter | 106mm |
| Width | 38mm |
A proven choice for industrial professionals, this Deep Groove Ball Bearing features an 85mm inside diameter, a 106mm outside diameter, and a 38mm width. Constructed from high-performance nylon, it offers a significantly lower coefficient of friction compared to traditional steel bearings, reducing wear and energy consumption. Its inherent corrosion resistance makes it ideal for applications involving moisture or chemical exposure. The polymer raceways and balls provide excellent vibration damping and noise reduction, contributing to a quieter operating environment. This bearing is engineered for reliable performance in moderate load applications where weight and corrosion are key considerations.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the shaft and housing bore thoroughly to remove any debris or existing lubricants. 2. Carefully apply a thin, even layer of appropriate lubricant to the shaft and inside the bearing's inner ring. 3. Gently press the bearing onto the shaft, ensuring it is seated square and fully engaged. Avoid using excessive force or hammering.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during installation, leading to deformation or damage of the nylon raceway. | Use a bearing press or appropriate jig for controlled, even pressure. If manual installation is necessary, tap lightly and evenly around the inner ring. |
| Using incompatible lubricants that can degrade the nylon material over time. | Consult the bearing manufacturer's recommendations for compatible lubricants. Typically, light mineral oils or specific silicone-based greases are suitable for nylon bearings. |
A: This Deep Groove Ball Bearing is manufactured from Nylon.
A: Conveyor Systems, Material Handling Equipment, Textile Machinery, Food Processing Machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||