Engineered for reliability in demanding environments, this Nylon Deep Groove Ball Bearing offers superior corrosion resistance and lightweight performance. Its 66x75x31mm dimensions are optimized for efficient power transmission in sensitive equipment.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 66mm |
| Outside Diameter | 75mm |
| Width | 31mm |
Specified by design engineers worldwide, this Nylon Deep Groove Ball Bearing (66mm ID x 75mm OD x 31mm Width) leverages advanced polymer science for exceptional performance. The nylon material provides inherent corrosion resistance, reduced friction, and excellent vibration damping capabilities, making it ideal for applications where lubrication is limited or undesirable. Operating at lower load capacities and higher speeds than traditional steel bearings, its precision construction ensures smooth, quiet operation and extended service life in environments sensitive to metallic contamination or moisture. This bearing is engineered to meet rigorous industrial standards for power transmission components.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the bearing housing and shaft thoroughly to remove any debris. 2. Gently press the bearing into its designated housing, ensuring it is seated squarely and without excessive force. 3. If mounting on a shaft, use an appropriate press or bearing puller to achieve a snug fit, avoiding impact on the inner race.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during installation, potentially deforming the nylon race. | Utilize a controlled press or appropriate bearing installation tools, ensuring force is applied evenly to the outer race when pressing into a housing, or the inner race when mounting on a shaft. |
| Using incompatible lubricants or cleaning agents that can degrade nylon. | Consult the material compatibility chart for nylon bearings. Typically, mild detergents and water are suitable for cleaning, and specific synthetic lubricants may be required if lubrication is necessary. |
A: This Deep Groove Ball Bearing is manufactured from Nylon.
A: Conveyor systems in food processing, Textile machinery components, Medical equipment assemblies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||