This high-performance Nylon Deep Groove Ball Bearing offers a lightweight, corrosion-resistant solution for power transmission. Engineered for smooth, quiet operation and reduced friction, it excels in demanding industrial settings.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 65mm |
| Outside Diameter | 88mm |
| Width | 35mm |
Designed for demanding industrial environments, this deep groove ball bearing features an inside diameter of 65mm, an outside diameter of 88mm, and a width of 35mm. Constructed from advanced nylon, it provides superior corrosion resistance, a lower coefficient of friction, and reduced noise compared to traditional steel bearings. Its inherent material properties make it ideal for applications where lubrication is limited or undesirable, and where weight reduction is a key consideration. This bearing is well-suited for conveyor systems, automated machinery, and light-duty power transmission components.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the shaft and housing surfaces are clean and free from debris. 2. Carefully press the bearing onto the shaft, ensuring even pressure is applied to the inner ring. 3. Gently tap the outer ring into the housing, verifying alignment and ensuring no excessive force is applied that could damage the nylon cage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force to the outer ring during installation, potentially damaging the nylon cage. | Use a press or a soft mallet to apply even pressure to the outer ring. If pressing, ensure the correct tooling is used for the housing bore. |
| Over-lubricating the bearing, which can degrade the nylon material over time. | Nylon bearings are often self-lubricating or require minimal lubrication. Consult the product datasheet for specific lubrication recommendations; avoid over-application. |
A: This Deep Groove Ball Bearing is manufactured from Nylon.
A: Conveyor Systems, Automated Machinery, Light-Duty Gearboxes.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||