This robust Nylon Deep Groove Ball Bearing is engineered for superior performance in power transmission systems. Its lightweight, corrosion-resistant construction ensures reliable, quiet operation in diverse industrial environments.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 49mm |
| Outside Diameter | 111mm |
| Width | 35mm |
Specified by design engineers worldwide, this deep groove ball bearing features a 49mm inside diameter, a 111mm outside diameter, and a 35mm width. Constructed from high-grade nylon, it offers exceptional resistance to corrosion, chemicals, and moisture, making it ideal for wet or corrosive environments where traditional steel bearings may fail. The inherent low friction and self-lubricating properties of nylon contribute to reduced wear and extended service life, while its lightweight nature minimizes system inertia. This makes it a preferred choice for applications requiring high speed, low noise, and minimal maintenance.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing housing and shaft are clean and free from debris. 2. Carefully press the bearing onto the shaft or into the housing, applying even pressure to the outer or inner ring respectively, avoiding direct impact on the rolling elements. 3. Verify smooth rotation and proper seating before engaging the power transmission system.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force directly to the rolling elements during installation. | Always apply force to the ring (inner or outer) that is being seated. Use an appropriate bearing press or induction heater for proper mounting. |
| Improper shaft or housing fit, leading to brinelling or premature wear. | Ensure shaft and housing dimensions meet specified tolerances. A press fit is typically required for proper load distribution and bearing longevity. |
A: This Deep Groove Ball Bearing is manufactured from Nylon.
A: Conveyor systems, Material handling equipment, Automated machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||