This high-performance Nylon Deep Groove Ball Bearing is engineered for demanding power transmission roles. Its robust construction ensures reliable operation under significant loads, minimizing friction and maximizing efficiency in critical machinery.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 45mm |
| Outside Diameter | 30mm |
| Width | 34mm |
Purpose-built for heavy-duty applications, this Nylon Deep Groove Ball Bearing boasts an Inside Diameter of 45mm, an Outside Diameter of 30mm, and a Width of 34mm. The advanced nylon material offers superior chemical resistance and self-lubricating properties, reducing wear and extending service life compared to traditional metal bearings in corrosive or low-lubrication environments. Its design allows for high radial and axial loads, making it an optimal choice for conveyor systems, industrial machinery, and agricultural equipment where durability and quiet operation are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the bearing housing and shaft thoroughly before installation. 2. Carefully press the bearing into the housing, ensuring it is seated squarely and without tilting. 3. If pressing onto a shaft, use a suitable bearing puller or press, applying force to the inner ring only.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force to the outer ring during shaft mounting. | Always apply mounting force to the inner ring when fitting the bearing onto a shaft to prevent damage to the raceways and balls. |
| Installing a dirty or contaminated bearing. | Inspect the bearing for any signs of contamination before installation and ensure it is clean and free from debris. |
A: This Deep Groove Ball Bearing is manufactured from Nylon.
A: Conveyor Systems, Industrial Gearboxes, Agricultural Machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||