This Deep Groove Ball Bearing, constructed from high-performance nylon, offers a unique solution for light-duty power transmission. Its non-metallic nature provides inherent corrosion resistance and electrical insulation properties, ideal for specialized applications.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 44mm |
| Outside Diameter | 33mm |
| Width | 43mm |
Engineered for reliability and performance, this Deep Groove Ball Bearing features an Inside Diameter (ID) of 44mm, an Outside Diameter (OD) of 33mm, and a Width of 43mm. The advanced nylon material provides excellent chemical resistance, low friction, and silent operation, making it suitable for environments where traditional steel bearings may degrade or conduct electricity. Its lightweight design and self-lubricating characteristics contribute to reduced maintenance and extended service life in low-load applications, ensuring consistent rotational accuracy. This bearing is designed to withstand moderate radial loads and light axial loads.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing housing and shaft are clean and free from debris. 2. Carefully press the bearing onto the shaft, applying even pressure to the inner ring only. 3. Secure the bearing in its housing, ensuring proper alignment and no excessive pre-load.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying force to the outer ring during shaft installation. | Always apply installation force exclusively to the inner ring to prevent brinelling or damage to the raceways. |
| Using excessive lubricant or incompatible cleaning agents. | Nylon bearings are often self-lubricating; avoid over-greasing and use only compatible, mild cleaning solutions if necessary. |
A: This Deep Groove Ball Bearing is manufactured from Nylon.
A: Medical equipment, Food processing machinery, Corrosive chemical handling systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||