This robust Nylon Deep Groove Ball Bearing is engineered for efficient power transmission. Its advanced material composition ensures exceptional durability, low friction, and resistance to corrosive environments, making it ideal for demanding industrial applications.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 43mm |
| Outside Diameter | 171mm |
| Width | 48mm |
Precision-manufactured to tight tolerances, this Deep Groove Ball Bearing features an inside diameter of 43mm, an outside diameter of 171mm, and a width of 48mm. Constructed from high-grade nylon, it offers a lightweight yet exceptionally strong solution with inherent corrosion resistance and self-lubricating properties. This material choice significantly reduces the need for external lubrication and minimizes maintenance, while its excellent impact absorption capabilities contribute to extended service life in environments prone to vibration or shock loads. Suitable for moderate speeds and loads, it excels in applications requiring chemical inertness and electrical insulation.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing housing and shaft are clean and free of debris. 2. Carefully press the bearing onto the shaft or into the housing, applying even pressure to the outer or inner ring respectively. 3. Verify smooth rotation and check for any binding or excessive play.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying force to the wrong ring during installation. | Always apply installation force to the ring that is being fitted. For shaft mounting, press on the inner ring; for housing mounting, press on the outer ring. |
| Over-tightening or under-tightening the shaft or housing. | Ensure the shaft and housing provide the correct interference or clearance fit as specified by the design to prevent premature wear or looseness. |
A: This Deep Groove Ball Bearing is manufactured from Nylon.
A: Conveyor systems, Automated machinery, Material handling equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||