This deep groove ball bearing, constructed from high-performance nylon, offers a lightweight and corrosion-resistant solution for various power transmission applications. Its inherent self-lubricating properties ensure smooth, low-friction operation.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 41mm |
| Outside Diameter | 29mm |
| Width | 13mm |
Engineered for reliability and performance, this deep groove ball bearing boasts an inside diameter of 41mm, an outside diameter of 29mm, and a width of 13mm. The advanced nylon composite material provides excellent chemical resistance, a reduced coefficient of friction, and inherent dampening capabilities compared to traditional steel bearings. This makes it ideal for environments where lubrication is challenging or contamination is a concern, ensuring consistent performance in demanding industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the shaft and housing are clean and free from debris. 2. Carefully press the bearing onto the shaft, maintaining alignment. 3. Gently seat the bearing within the housing, ensuring a snug fit.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during installation, leading to brinelling or deformation of the nylon raceways. | Utilize a bearing press or appropriate fixture for controlled and even force application during installation. |
| Improper shaft or housing fit, causing misalignment and premature wear. | Verify that the shaft and housing tolerances meet the recommended specifications for this bearing size to ensure proper seating. |
A: This Deep Groove Ball Bearing is manufactured from Nylon.
A: Conveyor systems, Textile machinery, Food processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||