This high-performance Nylon Deep Groove Ball Bearing offers exceptional corrosion resistance and a lightweight design. Engineered for smooth operation and longevity in diverse power transmission systems.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 27mm |
| Outside Diameter | 179mm |
| Width | 33mm |
Engineered for reliability and performance, this Nylon Deep Groove Ball Bearing features an inside diameter of 27mm, an outside diameter of 179mm, and a width of 33mm. Constructed from advanced nylon, it provides excellent chemical resistance, reduced friction, and is significantly lighter than traditional steel bearings, making it ideal for applications where weight reduction and corrosion are critical factors. Its self-lubricating properties further enhance its suitability for environments with limited maintenance access.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the shaft and housing bore thoroughly. 2. Carefully press the bearing onto the shaft, ensuring it is seated squarely. 3. Gently press the bearing into the housing, verifying proper alignment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Forcing the bearing during installation, leading to brinelling or damage. | Use a proper bearing press or mandrel for controlled and even pressure during installation. |
| Insufficient lubrication or using incompatible lubricants with nylon. | Refer to the material data sheet for recommended lubricants or rely on the inherent self-lubricating properties of the nylon unless specified otherwise. |
A: This Deep Groove Ball Bearing is manufactured from Nylon.
A: Material Handling Systems, Conveyor Rollers, Lightweight Machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||