This robust Nylon Deep Groove Ball Bearing offers exceptional performance in power transmission systems. Its polymer construction ensures quiet operation, corrosion resistance, and reduced lubrication requirements for extended service life.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 22mm |
| Outside Diameter | 93mm |
| Width | 49mm |
Precision-manufactured to tight tolerances, this Deep Groove Ball Bearing features an inner diameter of 22mm, an outer diameter of 93mm, and a width of 49mm. Constructed from high-grade nylon, it exhibits superior chemical resistance, excellent electrical insulation properties, and a lower coefficient of friction compared to traditional steel bearings. This makes it ideal for applications where corrosion is a concern, noise reduction is paramount, or where electrical isolation is required. Its lightweight nature also contributes to reduced rotational inertia.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating shaft and housing surfaces are clean and free of debris. 2. Carefully press the bearing onto the shaft, ensuring it is seated squarely and without tilting. 3. Mount the assembly into the housing, applying even pressure to avoid brinelling the bearing races.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Forcing the bearing onto an improperly sized shaft. | Verify shaft diameter and use appropriate press-fitting techniques or bearing heaters/coolers for proper installation. |
| Introducing contaminants during installation. | Handle the bearing with clean hands or gloves and keep the work area spotless. |
A: This Deep Groove Ball Bearing is manufactured from Nylon.
A: Conveyor systems, Electric motors, Pumps and fluid handling equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||